Pool Permit Drawings & Engineered Plans in Connecticut
Swimming pool permit drawing sets for Connecticut contractors, including structural, MEP and hydraulic work for Fairfield County (Greenwich, Stamford, Westport), Hartford County, New Haven County and Middlesex and New London Counties and other Connecticut jurisdictions. Send your survey or sketch and project location to request a quote.
Share your project details using the enquiry form. No account needed.
What a Connecticut set has to satisfy
Tell us the city or county in Connecticut, the pool type and which drawings you need. Include any project checklist or review comments so the scope can address your specific submission.
Request a fixed-price quote for your plan set. The quote sets out the included drawings, revision allowance and estimated delivery date before work begins.
Plans are sealed by a Professional Engineer licensed in Connecticut, who reviews the package and takes responsible charge before applying their seal.
- 01Pool barrier, gate and alarm details to the Connecticut requirements that apply to your site
- 02Site plans and setbacks prepared for Fairfield County (Greenwich, Stamford, Westport), Hartford County and New Haven County submittals
- 03Frost depth near 42 in and severe freeze-thaw on shells, coping and decks
- 04Shallow ledge rock, boulders and glacial till with perched groundwater
- 05Coastal flood zones and hurricane wind along Long Island Sound
- 06Hydraulic (TDH) calculations, equipment pad and bonding details
Connecticut pool permit requirements
The state-level rules your drawings are checked against. Cities and counties can add local amendments, so send the jurisdiction with your enquiry.
- Residential code
- 2022 Connecticut State Building Code (2021 IRC and 2021 ISPSC with state amendments), mandatory statewide since Oct 1, 2022; a 2026 code based on the 2024 I-Codes awaits final approval.
- Pool barriers
- Residential barriers follow the 2021 ISPSC as amended in the 2022 Connecticut State Building Code.
- Contractor licensing
- Department of Consumer Protection issues the Swimming Pool Builder (SPB) license for new inground pools and spas, which also requires home improvement contractor registration; SP-1 and SP-2 cover pool service work.
- Public pools
- Connecticut Department of Public Health, Public Health Code, Regulations of Connecticut State Agencies Section 19-13-B33b (public swimming pools), with the DPH Public Swimming Pool Design Guide.
- Engineer licensing
- Connecticut State Board of Examiners for Professional Engineers and Land Surveyors
Frequently Asked
What license does an inground pool builder need in Connecticut?
A Swimming Pool Builder (SPB) license from the Department of Consumer Protection, which also requires home improvement contractor registration. Service and repair work on pool equipment falls under the separate SP-1 and SP-2 licenses.
Which code applies to residential pools in Connecticut?
The 2022 Connecticut State Building Code, which adopts the 2021 IRC and 2021 ISPSC with state amendments. A 2026 code based on the 2024 ISPSC is pending; we design to the edition in force at permit submission.
Are your Connecticut pool plans sealed by a Connecticut-licensed engineer?
Yes. A Professional Engineer licensed in Connecticut reviews the package, takes responsible charge and applies their seal. You receive a submission-ready set for your Connecticut jurisdiction.
Nearby states: New York · Massachusetts · Rhode Island · All 50 states
Tell us about your project
Share your scope, project location and target date. We will follow up with questions or a quote.
Your contact: Benatic Paul Martin, JEBN Engineering Studio · benatic@jebnengineering.com