Pool Permit Drawings & Engineered Plans in Kentucky
Swimming pool permit drawing sets for Kentucky contractors, including structural, MEP and hydraulic work for Louisville, Lexington and Bowling Green and other Kentucky jurisdictions. Send your survey or sketch and project location to request a quote.
Share your project details using the enquiry form. No account needed.
What a Kentucky set has to satisfy
Tell us the city or county in Kentucky, the pool type and which drawings you need. Include any project checklist or review comments so the scope can address your specific submission.
Request a fixed-price quote for your plan set. The quote sets out the included drawings, revision allowance and estimated delivery date before work begins.
Plans are sealed by a Professional Engineer licensed in Kentucky, who reviews the package and takes responsible charge before applying their seal.
- 01Pool barrier, gate and alarm details to the Kentucky requirements that apply to your site
- 02Site plans and setbacks prepared for Louisville, Lexington and Bowling Green submittals
- 03Extensive karst limestone; sinkhole risk around Bowling Green and Lexington
- 04New Madrid seismic zone; higher Seismic Design Categories in west Kentucky
- 05Frost depth around 24 in. with frequent freeze-thaw cycles
- 06Hydraulic (TDH) calculations, equipment pad and bonding details
Kentucky pool permit requirements
The state-level rules your drawings are checked against. Cities and counties can add local amendments, so send the jurisdiction with your enquiry.
- Residential code
- 2018 Kentucky Residential Code (based on the 2015 IRC, 815 KAR 7:125), mandatory statewide and administered by the Department of Housing, Buildings and Construction.
- Pool barriers
- Kentucky Residential Code Section R326, including R326.8 barrier requirements for residential swimming pools.
- Contractor licensing
- No statewide license for residential pool contractors; the Department of Housing, Buildings and Construction licenses plumbing, electrical and HVAC trades, and general builders are regulated locally.
- Public pools
- Cabinet for Health and Family Services rule 902 KAR 10:120 (Kentucky public swimming and bathing facilities) requires written plan approval before construction, with plans by a Kentucky registered engineer or architect for government pools and pools over 1,600 sq ft.
- Engineer licensing
- Kentucky State Board of Licensure for Professional Engineers and Land Surveyors
Frequently Asked
Where are Kentucky residential pool barrier rules found?
The 2018 Kentucky Residential Code, adopted statewide under 815 KAR 7:125, carries residential pool provisions in Section R326, with barrier requirements in R326.8. Local building departments enforce it.
Does a public pool in Kentucky need an engineer's seal?
Under 902 KAR 10:120, pools built by state or local government, and pools over 1,600 sq ft of water surface, need plans prepared and sealed by a Kentucky registered engineer or architect, with written approval before construction.
Are your Kentucky pool plans sealed by a Kentucky-licensed engineer?
Yes. A Professional Engineer licensed in Kentucky reviews the package, takes responsible charge and applies their seal. You receive a submission-ready set for your Kentucky jurisdiction.
Nearby states: Indiana · Ohio · Tennessee · Virginia · All 50 states
Tell us about your project
Share your scope, project location and target date. We will follow up with questions or a quote.
Your contact: Benatic Paul Martin, JEBN Engineering Studio · benatic@jebnengineering.com