Pool Permit Drawings & Engineered Plans in New Mexico
Swimming pool permit drawing sets for New Mexico contractors, including structural, MEP and hydraulic work for Albuquerque, Las Cruces, Santa Fe and Rio Rancho and other New Mexico jurisdictions. Send your survey or sketch and project location to request a quote.
Share your project details using the enquiry form. No account needed.
What a New Mexico set has to satisfy
Tell us the city or county in New Mexico, the pool type and which drawings you need. Include any project checklist or review comments so the scope can address your specific submission.
Request a fixed-price quote for your plan set. The quote sets out the included drawings, revision allowance and estimated delivery date before work begins.
Plans are sealed by a Professional Engineer licensed in New Mexico, who reviews the package and takes responsible charge before applying their seal.
- 01Pool barrier, gate and alarm details to the New Mexico requirements that apply to your site
- 02Site plans and setbacks prepared for Albuquerque, Las Cruces and Santa Fe submittals
- 03Collapsible and expansive soils common in Albuquerque and Las Cruces
- 04Moderate seismic demand along the Rio Grande rift corridor
- 05Frost depth varies with elevation, deeper in Santa Fe and the north
- 06Hydraulic (TDH) calculations, equipment pad and bonding details
New Mexico pool permit requirements
The state-level rules your drawings are checked against. Cities and counties can add local amendments, so send the jurisdiction with your enquiry.
- Residential code
- 2021 New Mexico Residential Building Code (14.7.3 NMAC, 2021 IRC with state amendments), adopted by the Construction Industries Division, effective July 14, 2023.
- Pool barriers
- 14.7.3.25 NMAC (Chapter 45, pools and spas on one- and two-family dwelling lots), which replaces IRC Section R326 and requires a barrier at least 48 inches high.
- Contractor licensing
- Construction Industries Division (Regulation and Licensing Department), classification GS-25 Swimming Pools; pool plumbing falls under MM-1 Plumbing.
- Public pools
- New Mexico Environment Department, 7.18.2 NMAC (Public Swimming Pools, Spas and Baths: General Provisions), requiring a construction permit with plans stamped by a New Mexico registered engineer or architect.
- Engineer licensing
- New Mexico State Board of Licensure for Professional Engineers and Professional Surveyors
Frequently Asked
Where are New Mexico's residential pool barrier rules?
In the 2021 New Mexico Residential Building Code, 14.7.3 NMAC. It deletes IRC Section R326 and adds Chapter 45 (14.7.3.25 NMAC) for pools on one- and two-family lots, with a 48 inch minimum barrier height.
Do public pool plans in New Mexico need an engineer's stamp?
Yes. 7.18.2 NMAC requires a New Mexico Environment Department construction permit before a public pool is built or modified, with plans stamped and signed by a New Mexico registered professional engineer or architect.
Are your New Mexico pool plans sealed by a New Mexico-licensed engineer?
Yes. A Professional Engineer licensed in New Mexico reviews the package, takes responsible charge and applies their seal. You receive a submission-ready set for your New Mexico jurisdiction.
Nearby states: Arizona · Colorado · Oklahoma · Texas · All 50 states
Tell us about your project
Share your scope, project location and target date. We will follow up with questions or a quote.
Your contact: Benatic Paul Martin, JEBN Engineering Studio · benatic@jebnengineering.com